The GT 1804, GT 2004, GT 2104 and GT 2204 span 177.55 to 217.25 hp, pairing turbocharged six-cylinder power with 4WD traction, independent PTO and high-capacity hydraulics for demanding field work.
GROWER Tractor has set out its high-horsepower offering for large farms and agricultural service providers with its 180–220 HP range, a four-model family covering the power band between the company’s mid-range tractors and its largest machines. According to GROWER, the GROWER 180–220 HP tractors are engineered for large-scale agricultural operations, extensive farming and high-demand agricultural services, where sustained power, traction and implement capacity determine how much ground can be covered in a working day.
The lineup comprises the GROWER GT 1804, GT 2004, GT 2104 and GT 2204. All four share a common engine architecture and 4WD layout, but GROWER specifies clear differences between them in output, PTO power, lift capacity, transmission, fuel capacity and ballast. Each step up the range therefore represents more than a change of badge.
GROWER’s 180–220 HP Range
The range occupies a defined position in GROWER’s broader tractor portfolio, which the company describes as running from the compact GT 254 up to the GT 4404. Above it sits a 240–440 HP range. Below it are families covering 25–50, 55–80, 90–120 and 130–160 HP.
The four rated outputs published by GROWER are:
- GT 1804: 132.4 kW / 177.55 hp
- GT 2004: 147 kW / 197.13 hp
- GT 2104: 154.4 kW / 207 hp
- GT 2204: 162 kW / 217.25 hp
All four ratings are quoted at 2,200 rpm. The progression gives buyers roughly 10–20 hp increments across the family. Operators can match tractor size to implement width, soil type and workload rather than buying excess capacity.
Power Built for Demanding Agricultural Operations
Every model in the range uses an inline six-cylinder, water-cooled, four-stroke diesel with direct injection, turbocharging and intercooling. GROWER lists the same core dimensions for all four engines: 6.75 litres of displacement, a 105 mm bore and a 130 mm stroke. Each model carries its own engine designation, and the power ratings differ accordingly.
The six-cylinder configuration is the conventional choice in this horsepower class. It balances torque delivery with smoothness during long periods under load. Turbocharging with intercooling allows higher output from a given displacement, which matters for tractors expected to pull heavy tillage tools or run power-hungry PTO equipment for extended shifts.
Power reaches the ground through a 4WD/4×4 driveline on all four tractors. Maximum traction force is listed at 42.63 kN (9,583.61 lbf) for the GT 1804. The GT 2004, GT 2104 and GT 2204 each list 51.82 kN (11,649.04 lbf), a significant step for operators working primary tillage or heavy drawbar applications.
Fuel capacity also scales across the range, which is relevant for long days away from the yard. The tanks hold 265 L (70 gal) on the GT 1804, 300 L (79 gal) on the GT 2004, 320 L (84.5 gal) on the GT 2104 and 350 L (92.4 gal) on the GT 2204.
PTO and Hydraulic Capability
For many buyers in this segment, PTO and hydraulic capacity matter as much as engine output. GROWER specifies a rear-mounted, independent PTO across the range. Every model is offered with either 760/850 or 540/1000 rpm speed configurations, giving flexibility across different implement standards.
Published PTO power runs from 150.92 hp on the GT 1804 to 184.66 hp on the GT 2204. The GT 2004 and GT 2104 are both listed at 167.56 hp. The GT 1804 uses an 8-spline shaft with a 6-spline option, while the three larger models use a 21-spline involute shaft, the heavier-duty profile typically associated with higher-horsepower PTO work.
The hydraulic specification also changes between models. The GT 1804 comes with two pairs of hydraulic outlets as standard, and GROWER lists a configuration with three pairs. The GT 2004, GT 2104 and GT 2204 come with three pairs as standard. All four offer height control and float control for the three-point hitch.
Lifting capacity rises through the range:
- GT 1804: 31.776 kN (7,143.53 lbf)
- GT 2004 and GT 2104: 35.28 kN (7,931.26 lbf)
- GT 2204: 38.88 kN (8,740.57 lbf)
The first three models use a rear three-point hitch compatible with Category II and III implements. The GT 2204 is specified for Category III only, reflecting its orientation toward the largest mounted equipment. GROWER also states that the range integrates high-capacity hydraulic systems and is fully compatible with the company’s own implement lineup.
Four Models, Different Power Levels
GROWER GT 1804
The GT 1804 is the entry point to the range at 177.55 hp, with 150.92 hp available at the PTO. It uses an F24 + R8 gearbox with a top speed of 38 km/h (24 mph). Minimum operating weight with cab is 6,600 kg (14,550 lb) on a 2,758 mm (108 in) wheelbase, and ground clearance is 428 mm. It runs on 14.9-26 front and 16.9-38 rear tires. Optional ballast reaches 600 kg at the front and 360 kg at the rear. It is the lightest and most compact configuration in the family, suited to operations stepping up into six-cylinder power.
GROWER GT 2004
The GT 2004 raises rated output to 197.13 hp and PTO power to 167.56 hp. It shares the F24 + R8 transmission and 38 km/h top speed but moves up in scale. The wheelbase is 2,840 mm (112 in), ground clearance is 445 mm, and the tires are larger at 14.9-28 front and 20.8-38 rear. GROWER lists both single and dual rear-wheel configurations. Operating weight is 7,050 kg (15,543 lb) with two rear tires and 7,840 kg (17,284 lb) with four. Front ballast capacity nearly doubles over the GT 1804 to 1,120 kg.
GROWER GT 2104
The GT 2104 delivers 207 hp from its six-cylinder engine and carries the largest fuel tank below the flagship at 320 L. It retains the F24 + R8 gearbox, three pairs of hydraulic outlets, 35.28 kN lift capacity, 14.9-28/20.8-38 tires and optional front ballast of up to 1,120 kg. Its PTO output is listed at 167.56 hp.
GROWER GT 2204
The GT 2204 is the most powerful model in this range at 217.25 hp, with the range’s highest PTO output of 184.66 hp. It differs mechanically from its siblings in several respects. It uses an F18 + R9 transmission with a 36 km/h (22.3 mph) top speed, 16.9-28 front tires and a Category III-only hitch. It also offers the range’s highest lift capacity of 38.88 kN. Like the GT 2004, it is offered in single and dual rear-wheel configurations, with operating weights of 7,050 kg and 7,840 kg respectively.
Where This Power Class Fits
Tractors in the 180–220 hp bracket are generally associated with large-scale arable farming, heavy primary and secondary tillage, and wide mounted or trailed implements. They are also used by agricultural contractors, whose machines must handle a varied workload across multiple farms.
The link between the specifications is direct. Engine output determines the implement size a tractor can sustain. Traction force and ballast options determine how effectively that power is converted to drawbar pull. PTO rating and shaft profile govern the use of power-driven equipment. Hydraulic outlets and lift capacity define what can be mounted and controlled from the cab.
GROWER’s own description emphasizes continuous performance across different terrains and in transport work, as well as productivity per hectare. With top speeds of 36–38 km/h and dual-wheel options on the larger models, the range covers both in-field tasks and road haulage between fields.
Operator Control and Working Environment
GROWER describes the 180–220 HP range in terms of maneuverability, stability and traction capability across varied terrain and operating conditions. All four models use full hydraulic steering on the front wheels.
According to the company, the cab is spacious and ergonomically designed for long operating hours. It offers 360° panoramic visibility, which GROWER positions as supporting precise control both in the field and on the road. Adjustable front and rear track widths, listed for each model, allow the tractors to be set up for different row spacings and ground conditions.
GROWER in a Competitive Global Tractor Market
The high-horsepower tractor segment is served by a number of long-established manufacturers. Farmers and contractors can choose from brands including Case IH, New Holland Agriculture, John Deere, Massey Ferguson, Valtra, Kubota and DEUTZ-FAHR. Each offers tractors across a wide spread of horsepower categories and serves different regions, farm sizes and operating preferences.
In a market with this many options, buyers typically weigh power, PTO and hydraulic capacity, dealer support, financing and total operating cost against their own workload. GROWER enters that conversation with a six-range tractor portfolio. Its offering is supported by financing, parts and service, rental options and what the company describes as a global dealer network.
GROWER Tractor in the United States
GROWER Tractor is headquartered in Florida and Texas, USA, with a Miami, Florida address listed on its official website. This U.S. base gives the brand a direct presence in one of the world’s largest agricultural machinery markets. It serves farmers and dealers who operate high-horsepower tractors across extensive row-crop and mixed farming regions.
